PISO-DNM100 DeviceNet Master API functions User’s Manual (Ver: 1.0) 2008/02/25
115
4.4.54 DNM100_UpdateCOSConfig
z
D
escription:
The function is to update the original COS information. This
configuration data will be updated into the EEPROM of the PISO-
DNM100.
z
Syntax:
DWORD DNM100_UpdateCOSConfig (BYTE BoardNo,
BYTE DesMACID,
WORD DeviceInputLen,
WORD DeviceOutputLen,
WORD EPR)
z
Parameter:
BoardNo:
[input] PISO-DNM100 board number (0~15)
DestMACID:
[input] The remote slave device’s MAC ID (0~63)
DeviceInputLen:
[input] The input data length of the slave device.
DeviceOutputLen:
[input] The output data length of the slave device.
EPR:
[input] The EPR value of the slave device.
z
Return:
DNM100_NoError (0):
OK
DNM100_DriverError (10001):
Kernel driver is not opened.
DNM100_ActiveBoardError (10002):
This board can not be activated or
kernel driver can not be found.
DNM100_BoardNumberError (10003):
BoardNo exceeds the current
scanned total board number.
DNM100_TimeOut (10023):
The PISO-DNM100 has no response.
Others:
Please refer to Table 4.2.2 ~ Table 4.2.9
