![background image](http://html1.mh-extra.com/html/icp-das-usa/piso-dnm100-d/piso-dnm100-d_user-manual_4476349024.webp)
PISO-DNM100 DeviceNet Master API functions User’s Manual (Ver: 1.0) 2008/02/25
24
2.5 Hardware Installation
When users want to use PISO-DNM100-D/T, the hardware installation
needs to be finished as following steps.
1. Shutdown your personal computer.
2. Configure the DIP switch and JP1 of your PISO-DNM100-D/T for board No.
and terminal resistance. More detail information could be found on the figure
2.1 and table 2.1.
3. Check JP3 status of PISO-DNM100-D/T. If necessary, enable it.
4. Find an empty PCI slot for your PISO-DNM100-D/T on the mother board of
the personal computer. Plug the configured PISO-DNM100-D/T into this
empty PCI slot. See figure 2.5.
5. Plug your CAN bus cable(s) into the 5-pin screw terminal connector or the 9-
pin D-sub connector.
When the steps described above is completed, turn on the personal computer.
Figure 2.5 PISO-DNM100 installation