PISO-DNM100 DeviceNet Master API functions User’s Manual (Ver: 1.0) 2008/02/25
135
5.5 BCB_Demo1 Introduction
BCB_Demo1 is the example used for scanning the DeviceNet slave
devices in the network. The screen shoot is shown as Figure 5.5. This program
will show the information of all the slave devices. This demo is similar to
VC_Demo2. Before exercising this demo, the users should have at least one
DeviceNet slave device and finish the wire connection between the Master and
slave device. (See Figure 5.1) The users can configure the slave device by the
scanning information. This demo can be a tool to add or remove the
configuration of the slave device.
Figure 5.5 The screen shoot of BCB_Demo1
