ICP DAS USA LP-22 Series Page 91 User Manual Download

Page: 91 / 130

AM335X-PAC Series User Manual version 2.0.1 Page: 91

(d)

SMS Server Tools

The SMS Server tools package is an SMS Gateway application which can be used to send and

receive SMS messages via GSM modems and mobile phones. To send an SMS message via the

SMS Server, follow the procedure described below.

Step 1: Download the SMS Server Tools package.

The latest version of the SMS Server Tools package can be downloaded from:

http://smstools3.kekekasvi.com/index.php?p=packages

Step 2: Compile and install the SMS Server tools package.

Refer to the following website for detailed information about how to compile and install the SMS

Server tools package:

http://smstools3.kekekasvi.com/index.php?p=compiling

Step 3: Use the Linux

‘

’

command to modify the

‘

/etc/smsd.conf

’

file and change the

‘

device

’

parameters, as illustrated in Figure 5.6.2.1-8.

Figure 5.6.2.1-8.

Modifying the smsd configuration file

Summary of Contents for LP-22 Series



































































































































Search results

Summary of Contents for LP-22 Series

Reviews:

Related manuals for LP-22 Series

Brands by name

Popular brands

ICP DAS USA LP-22 Series, User Manual

Search results

Summary of Contents for LP-22 Series

Reviews:

Related manuals for LP-22 Series

Brands by name

Popular brands