ICP DAS USA LP-22 Series User Manual Download

Page: 34 / 130

AM335X-PAC Series User Manual version 2.0.1 Page: 34

2.3.3. Adding an I/O Device for LP-8x2x

All I/O Web Page include the I/O module specifications, pin assignments and wiring connections.

For example, Pin Assignments and Wiring connections for the I-87054W module are as follows:

http://www.icpdas.com/root/product/solutions/remote_io/rs-485/i-8k_i-87k/i-87054w.html

Step 1: Align circuit card with slot and press firmly to seat module into connector.

Tips & Warnings

It is recommended that the power to the LP-8x2x is switched off when wring

the I/O module which are plugging in the LP-8x2x slots.

Step 2: Pull top and bottom locking tabs toward module face. Click indicates lock is engaged.

Summary of Contents for LP-22 Series



































































































































Search results

Summary of Contents for LP-22 Series

Reviews:

Related manuals for LP-22 Series

Brands by name

Popular brands

ICP DAS USA LP-22 Series, User Manual

Search results

Summary of Contents for LP-22 Series

Reviews:

Related manuals for LP-22 Series

Brands by name

Popular brands