AM335X-PAC Series User Manual version 2.0.1 Page: 118
Copyright © 2019 ICP DAS Co., Ltd. All Rights Reserved. E-mail: [email protected]
Step 6: Use the
‘
ifconfig
’
command to display the current configuration information for the
network interface, as illustrated in Figure 7.2-3.
Figure 7.2-3.
Checking the IP address that has been assigned to the br0 interface
Step 7: Use the
‘
mstpctl showbridge br0
’
command to verify that the
‘
force protocol version
’
is
set to
RSTP
mode, as illustrated in Figure 7.2-4.
Figure 7.2-4.
Check that the MSTPD service is correctly configured
