manualshive.com logo in svg

ICP DAS USA I-8092F, Getting Started Manual, Page: 29 / 80

Share
Download
ICP DAS USA I-8092F Getting Started Manual Download Page 29

3.2.2 Install i-8092F software into WinPAC 

The necessary files for WinPAC now are packed into one CAB file. In WinPAC, 
double-click the CAB file will start installation automatically. The files then will be copied 
into the specific directories.   

 

 
When the installation is completed,    the driver and library will be copied into the specific 
directory defined in XPAC_CE. And the relevant utilities are installed into 
\System_Disk\i8092. 
 

［

Notice

］

 

WinPAC supports addon driver after OS Ver.1.3.0.0. Please check the OS version of target 

WinPAC.

 

 
The utilities are: 

 

MotionCfg – To configured the i8094/F and i8092F in XPAC_CE. When XPAC_CE 
booting up, the OS will refer to those configuration and activate the relative i-8092F 
modules. 

 

i8092F EzGo – Provide the similar features of PISO-PS200 EzGo utility. This utility 
helps to indicate the status of each axis, configure the polarity of external sensors 
and demonstrate the basic/simple motion-controlling models.   

 

i8092F EzFRnet – Demonstrate the 

FRnet

 features. 

 

http://www.icpdas.com 

                                                                     

I8092F Getting Started ManualVer.2.3

 

29

Summary of Contents for I-8092F

















































































Reviews:

No comments