ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
-31 -
3.2
Connecting the Power and the Host PC
Step 1: Connect both the ET-2200 module and the Host PC to the same sub network or the
same Ethernet Switch
Ensure that the network settings on the Host PC have been correctly configured and are functioning
normally. Ensure that the Windows firewall or any Anti-Virus firewall is properly configured to allow
incoming connections, or temporarily disable these functions, otherwise the
“Search Servers”
function in the eSearch Utility described in
Section 3.3“Configuring the Network Settings”
not perform as expected. Contact the System Administrator for instructions of how to do this.
Step 2: Apply power to the ET-2200. The valid power voltage range depends on the ET-2200
series module.
Step 3: Verify that the
“PWR”
LED indicator on the ET-2200
module is flashing
