ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
-43 -
Restore Factory Defaults
Restore all options to their factory default states
To reset all parameters to their original factory default settings, use the following procedure:
Step 1:
Click the
“Restore Defaults”
button to reset the configuration.
Step 2:
Click the
“OK”
button in the message dialog box.
Step 3:
Check whether the module has been reset to the original factory default settings for use
with the eSearch Utility. Refer to
Section 3.3 “Configuring the Network Settings”
The following table provides an overview of the factory default settings:
Factory Default Settings
IP Address
192.168.255.1
Gateway Address
192.168.0.1
Subnet Mask
255.255.0.0
