ICP DAS USA ET-2200 Series User Manual Download Page 5

Page: 5 / 125

ET-2200 Series Ethernet I/O Modules

-5 -

Introduction

The ET-2200 series modules, a IP-based Ethernet I/O module, features a built-in web server which

allows configuration, I/O monitoring and I/O control by simply using a regular web browser. In

addition, the ET-2200 also supports Modbus TCP/UDP protocol that makes perfect integration to

SCADA software.

1.1

Packing List

The shipping package includes the following items:

Quick Start x 1

ET-2200 Module x 1

Note:

If any of these items are missing or

damaged, please contact the local

distributor for more information.

Save the shipping materials and

cartons in case you need to ship the
module in the future.

Summary of Contents for ET-2200 Series























































































































Search results

Summary of Contents for ET-2200 Series

Reviews:

Related manuals for ET-2200 Series

Brands by name

Popular brands

ICP DAS USA ET-2200 Series, User Manual

Search results

Summary of Contents for ET-2200 Series

Reviews:

Related manuals for ET-2200 Series

Brands by name

Popular brands