ET-2200 Series Ethernet I/O Modules
Copyright © 2020 ICP DAS CO., Ltd. All Rights Reserved.
-55 -
DO Addr
For
“PULL”
mode, this parameter specifiesthe base address of the
Local
DO register
that will be mapped to the
Remote DI device
. The range
depends on the type of the ET-2200 module being used.
For
“PUSH”
mode, this parameter specifies the base address of the
Remote DO device
that will be mapped to the
Local DI register
. The range
depends on the type of remote device being used.
0
TCP/UDP
This parameter is used to set the type of Modbus protocol to be used and
can be either TCP or UDP
for the “PUSH” mode only
.
TCP
Update
Click
“Submit”
button to save the revised settings to the ET-2200 module.