iCON iPROTECT Instruction Manual Rev 4.4
11
12. Transfer Mode - Electrical Connections; floats or probes
The controller is rated IP54. It should be installed vertically where it has excellent
ventilation away from direct sunlight or exposure to adverse weather. Installation
inside a separate open fronted enclosure is suggested.
Any electrical alterations or additional connections should be carried out by a
suitably qualified technician. Ensure suitably rated circuit breakers are installed.
Isolate the controller before opening the cover to access the low voltage circuit
connections.
Bridging terminals 4,5 and 6 allows for
control by the destination inputs only.
The display screen will show the water
source as full.
Probes are not recommended
for use with black water or
contaminated liquids.
