Icom SR-VPN1 Instruction Manual Download

Page: 127 / 143

MAINTENANCE

6-6

There are two ways to update the firmware.

A: Updating on the setting screen.
Update the firmware on the setting screen.

B: Use the Firmware Update function. (

☞

P6-8)

The firmware can be automatically downloaded and updated.

• You can update the firmware using a USB flash drive. (

☞

P6-15)

• When [MSG] lights green, a firmware update is ready. See the “Precautions“ leaflet for details.

ABOUT THE FIRMWARE

The firmware may be updated when the functions and specifications of the SR-VPN1 are improved.
Ask your dealer for updated function or specification details.

NOTE:

• NEVER turn OFF the power until the updating has been completed. Otherwise, the SR-VPN1 may be dam

aged.

• If the firewall is running, stop it before updating the firmware. If you want to stop the firewall, ask your network

administrator for the detail.

• Icom is not responsible on the consequence of the updating the firmware.

4. How to update the firmware

Version number

Summary of Contents for SR-VPN1
















































































































































Search results

Summary of Contents for SR-VPN1

Reviews:

Related manuals for SR-VPN1

Brands by name

Popular brands

Icom SR-VPN1, Instruction Manual

Search results

Summary of Contents for SR-VPN1

Reviews:

Related manuals for SR-VPN1

Brands by name

Popular brands