6
MAINTENANCE
6-11
[How to clone the settings and the firmware using a USB flash drive.]
A USB flash drive can contain settings and firmware files for different SR-VPN1s.
You need to create folders, whose names are each SR-VPN1’s LAN MAC address (
☞
Pv, P5-5), and save the firm
-
ware and settings files to each folder.
Example: The SR-VPN1’s LAN MAC address is "0090C7000001.”
• Create the folder named “0090C7000001” in a USB flash drive, and then save the firmware and settings files to
the folder.
Insert the USB flash drive, into the SR-VPN1. Then the setting backup file is automatically created in the
“0090C7000001” folder.
The firmware and settings files are loaded from the “0090C7000001” folder.
Note: The firmware and settings files in any other folders are not loaded.
• If inserting the USB flash drive (Figure 1 and 2 in the picture below) into the SR-VPN1 (0090C7000002), the set
-
ting backup file is automatically created in the root directory as there is no folder whose name is SR-VPN1’s LAN
MAC address.
The firmware and settings files in the root directory are loaded.
5. About the Automatic Restore using a USB flash drive
(continued)
Figure 1
Figure 2
Create the "0090C7000001"
folder in the USB flash drive,
and then save the firmware or
settings file to the folder.
If there is no folder for the
S R - V P N 1 ' s M A C a d d r e s s ,
firmware and settings backup
f i l e s a r e s a v e d i n t h e r o o t
directory.
• You can create plural folders
and save the files into them.
(Example: “0090C7000001,”
“0090C7000002,”
“0090C7000003”)
Files in the "0090C7000001"
folder.
Backup file's updated date is not
displayed.
