4
OTHER BASIC FUNCTIONS
4-4
You can change the IP pool start address by following the procedure below.
3. Changing the IP Pool Start Address
Click the [Network Settings
] menu, then [DHCP Server].
• The [DHCP Server] screen appears.
1
Enter the new IP pool start address and default gateway
, and then click <Apply>
.
2
Setting example
Click <Reboot>.
• When you are asked to reboot the SR-VPN1, follow the instructions.
3
About the DHCP server function
The SR-VPN1's DHCP server function is enabled as the default.
• Before connecting the SR-VPN1 to a network, make sure that the addresses of the devices on the network don’t over
-
lap or conflict.
If a DHCP server is already connected to the network, and there is an address conflict, a network problem will occur.
See the Troubleshooting section for possible solutions.
About the maximum number of the IP addresses
Up to 128 addresses can be automatically assigned by the DHCP server function.
Another 32 addresses can be manually assigned.
e
Click
q
Enter
w
Enter
Click
