6
MAINTENANCE
6-4
There two ways to initialize the SR-VPN1.
• Set the SR-VPN1’s IP address again after the SR-VPN1 is initialized.
A: Using the <INIT> button.
If you cannot access the SR-VPN1 setting screen, initialize the SR-VPN1 using the <INIT> button.
B: Initialize on the SR-VPN1’s setting screen.
If you can access the SR-VPN1 setting screen, initialize the SR-VPN1 on the setting screen. (
☞
P5-88)
A: Using the <INIT> button
Initializing clears all the settings.
• If the network part of the PC IP address is different from that of the SR-VPN1, you cannot access the SR-VPN1
setting screen. In such case, change the PC IP address according to your network environment.
See the supplied “Precautions“ leaflet for details.
3. How to restore the settings
About the initializing condition
You can restore all the SR-VPN1’s settings. The SR-VPN1’s IP address is set to “192.168.0.1,” when initialized. Set the
PC’s IP address to “192.168.0.xxx.” (You can set xxx to any number from 2 to 254.)
And you must configure the interface Language and Time Zone. See the supplied leaflet for detail.
