Icom SR-VPN1 Instruction Manual Download

Page: 136 / 143

MAINTENANCE

6-15

(Continued on the next page.)

The firmware update can be done by using a USB flash drive.

Note: Before using a USB flash drive, see page 6-9.

Updating the firmware

7. How to update the firmware using a USB flash drive

Download a new firmware (extension: “dat”) from Icom website.

Select the root directory of the USB flash drive, and save the firmware file as “

firmware.dat.

“

• Any of other file name is not acceptable.

Insert the USB flash drive to the PC.

Remove the USB flash drive from the PC appropriately.

Prepare the SR-VPN1 to update the firmware.

Turn OFF the power.
Note: Turn OFF the SR-VPN1’s power, before inserting the USB flash drive.

Insert the USB flash drive to the [USB] port, and then turn ON the power.

• While transferring data, the [MSG] LED blinks.

Turn ON the power

Insert the USB flash drive

NOTE:

• NEVER turn OFF the power until the updating has been completed. Otherwise, the SR-VPN1 may be dam

aged.

• Icom is not responsible on the consequence of the updating the firmware.

Summary of Contents for SR-VPN1
















































































































































Search results

Summary of Contents for SR-VPN1

Reviews:

Related manuals for SR-VPN1

Brands by name

Popular brands

Icom SR-VPN1, Instruction Manual

Search results

Summary of Contents for SR-VPN1

Reviews:

Related manuals for SR-VPN1

Brands by name

Popular brands