Icom SB-110, Instruction Manual, Page: 9 / 102

SAFETY
PRECAUTIONS
viii
SAFETY PRECAUTIONS
¡ These precautions are intended to ensure that SB-110 is operated safely and cor-
rectly. Follow these instructions to avoid property damage and prevent personal
injury to yourself (user) or others in the vicinity.
¡ Before reading the rest of this manual, read and understand the precautions
listed under [
R
Warning ] and [
R
Caution ] below.
¡
After reading this manual, store it in a convenient place for future review.
Be sure to read these precautions in order to use SB-110 safely.
■
SB-110
Failure to observe the precautions listed here could result in
death of or serious injury to the user or those near the user.
◎ Do not touch SB-110 with moistened
hands.
Otherwise, you may get an electric shock.
◎
Do not put any heavy thing on the
connecting cable or pinch it.
Otherwise, the cable may be damaged,
a it may catch fire, you may get an
electric shock and SB-110 may
become out of order.
◎
Do not machine, bend by force, twist,
pull or heat the connecting cable.
Otherwise, the cable may be damaged,
a it may catch fire, you may get an
electric shock and SB-110 may
become out of order.
◎ SB-110 is adjusted fully. Do not
disassemble or remodel SB-110. Do
not repair SB-110 by yourself.
Otherwise, a it may catch fire, you may
get an electric shock and SB-110 may
become out of order.
◎ Discontinue use immediately if SB-
110 emits smoke, an abnormal odor,
or an abnormal noise.
Otherwise, a it may catch fire, you may
get an electric shock and SB-110 may
become out of order. Remove the AC
adapter and all the cables from SB-110
immediately. Confirm the smoke disap-
pears and contact the shop or our ser-
vice section.
◎ Do not install SB-110 at an unsuitable
place where the structural strength is
insufficient.
Otherwise, SB-110 may drop and
become out of order due to vibration or
wind and people may be injured.
◎ Do not install SB-110 at any crowded
area.
Otherwise, people may contact SB-110,
may fall to the ground or may be injured.
◎ Do not install SB-110 near the power
line or distribution line.
Otherwise, SB-110 cable may contact
the power line or distribution line, may
be short-circuited or heated. Moreover,
people may get an electric shock or a it
may catch fire.
◎ Do not touch SB-110, antenna cable
or power cable when it thunders.
Otherwise, you may get an electric shock.
◎ Use the specified articles and
accessories only.
Otherwise, a it may catch fire, you may
get an electric shock and SB-110 may
become out of order.
◎ Be sure to connect the power supply
to the DC connector only.
Otherwise, a it may catch fire, you may
get an electric shock and SB-110 may
become out of order.
R
Warning
PDF取説-E̲1 02.1.23 10:28 ページviii