Icom SB-110, Instruction Manual, Page: 17 / 102

5
BEFORE INSTALLATION
1
1
If SB-110 is located at several places on Ethernet LAN so that the radio
transmission areas can overlap each other, the wireless terminal can transmit
while moving from a radio transmission area to another. Consequently, the radio
transmission area can be extended.
If you use the roaming function, you need to change the default setting (
☞
see 4-3) into
the Access Point mode using a PC connected to SB-110 through a hub on Ethernet
LAN.
* To connect several SB-110s, use a hub.
1-5 Using Roaming Function
■ Notes on Use of Roaming Function (
☞
See the next page)
Ethernet LAN
Radio Transmission Area
Move Move
SB-110 is switched
from one to another
as the wireless
terminal moves. SB-110 is switched
from one to another
as the wireless
terminal moves.
Wireless LAN card
PDF取説-E̲1 02.1.23 10:28 ページ5