Icom SB-110, Instruction Manual, Page: 43 / 102

31
SETTING YOUR PC
3
3
2. To check the MAC address, select [Apple Menu] → [Control Panel] → [AppleTalk].
Then, either of the screens below is shown. Select "Ethernet" in the [Connect via:] field.
*
To show the left screen when the right screens is shown, select [Menu] in the menu bar, [User Mode]
and then [Advanced].
Check
[Mac OS]
Even when the PC has started up, the DHCP server does not give the IP address until
communication is made actually (i.e., until you access the internet or you access a mail
server). When <Refer to a server> is displayed on each item on the screen shown by the
procedure below, perform the communication once and then check again.
* The operation screen or any other details may vary depending on your operating system
version.
<How to check>
1. Select [Apple Menu]
→
[Control Panel]
→
[TCP/IP].
¡ If any IP address is assigned to the PC by the DHCP server, it is displayed on the [IP
Address] field.
Select 1.
Check
2.
PDF取説-E̲1 02.1.23 10:28 ページ31