Icom SB-110, Instruction Manual, Page: 24 / 102

12
INSTALLATION AND CONNECTION
2
2-3 How to Connect
If SB-110 of a default status is connected to a network in operation, an unexpected
accident may happen, e.g., the conflict in the IP address.
When you set SB-110, refer to "Setting SB-110" (
☞
see 4) also.
※ 1.The Ethernet cable of SB-110 is for straight connection. The total length of the
Ethernet cable of SB-110 should be within 100 m. The extended Ethernet cable
should be the Category 5 or higher.
※ 2.If the DC connector is exposed to rain, wind commercial adhesive tape around
the connector.
※ 3.The AC adapter is not waterproof. Do not expose it to rain.
※ 4.SB-110 is available for the hub of the transmission rate 100 Mbps.
PC PC
＝ × × × ×
Hub (Commercial article)
AD adapter
(Accessory)
AC outlet
SB-110
Ethernet cable
(Straight connection)
Ethernet cable
(Straight connection)
DC cable
PDF取説-E̲1 02.1.23 10:28 ページ12