Icom SB-110, Instruction Manual, Page: 21 / 102

CHAPTER 2
INSTALLATION AND CONNECTION
2-1. Installing on Mast
……………………………………………………………………
10
■ How to Install Elevation Angle Bracket
………………………………………
10
2-2. Fixing on Wall
………………………………………………………………………
11
2-3. How to Connect
……………………………………………………………………
12
2-4. Before Connecting Existing LAN
…………………………………………………
13
■ Checking Network Status
………………………………………………………
13
■ Setting IP Address
………………………………………………………………
13
■ Connecting to Existing LAN
……………………………………………………
13
This chapter describes how to install SB-110 and how to connect it to the pe-
ripheral devices.
【 Remarks 】
◎ Do not paint the case of SB-110. Otherwise, the radio wave is attenuated by metal
composition contained in the paint and SB-110 cannot show the performance fully.
◎ Fix the power cable connected to SB-110 and any other connecting cables to a
suitable position where nobody can touch.
【 Installation Work 】
When you install SB-110, we assume no responsibility for any building breakage, any
damage resulting from a drop of SB-110 from a high place or unstable site or resulting
from any personal injury nor any accident in any other cases. If SB-110 is must be
installed at such high place or unstable site, be sure to consult an expert engineer.
PDF取説-E̲1 02.1.23 10:28 ページ9