Icom SB-110, Instruction Manual, Page: 5 / 102

INTRODUCTION
iv
INTRODUCTION
NOTES ON HANDLING
◎ If a connection cable is removed or the connection becomes unstable during an opera-
tion, an error may occur. Connect the connectors completely and do not touch the con-
nectors during an operation.
◎ For the handling of PC and any peripheral devices, follow the instructions provided in
the manuals which come with the PC and other peripheral devices.
◎ SB-110 may cause the signal interference when it is used in your house. When the in-
terference occurs, move SB-110 as far as possible away from the affected household
electric appliance.
◎ The CD-ROM (excluding Acrobat Reader) which comes with SB-110 is for SB-110 only.
Do not use it for any other devices.
◎ Icom Inc. is not responsible for any interference arisen by incorporating a configuration
file for SB-110 or a firmware update data file, which is available in our home page, into
any device other than SB-110. Moreover, Icom Inc. is not responsible for any interfer-
ence arisen by modifying or disassembling SB-110. Furthermore, Icom Inc. is not re-
sponsible for any damages, lost profits or third party's claim resulting from any missed
communication or telephone call due to SB-110's fault, error, malfunction, breakage,
data loss or any other external factor such as power failure.
◎ All copyrights associated with this manual and all intellectual property rights associated
with the hardware and software of SB-110 are held by Icom Inc.
◎ Unauthorized diversion of this manual, in part or in whole, is prohibited.
◎ The content of this manual, the hardware and software associated with SB-110, and
the appearance of SB-110 are all subject to change without notice.
The following notational conventions are used in this manual:
•
The names of utilities, menus, windows, tabs, icons, text boxes, and check boxes are
enclosed in square brackets ([ ]).
•
The names of command buttons within dialog boxes are enclosed in less-than and
greater-than signs (< >).
*
The description of this manual is based the used of the firmware version 1.00 (see 6-6).
*
Windows 98 SE represents the Windows 98 Second Edition.
Windows Me represents the Windows Millennium Edition.
*
The contents of windows appearing in this manual may vary depending on the
operating system installed on your computer.
Notational Conventions
PDF取説-E̲1 02.1.23 10:28 ページiv