Icom SB-110, Instruction Manual, Page: 71 / 102

5-4 [Routing function] Screen
■
RIP
59
SETTING SCREEN
5
5
Specify whether the RIP function is used or not (default
setting Yes).
When the RIP is used, an RIP packet is broadcasted at
approximately 30 seconds using the broadcast address of
the access point.
* When you have changed this setting, click the [Set &
Reboot] button to enable the change.
■
Network Interface List
Refer to the description of [Path] of [IP Routing Informa-
tion] (
☞
see page 60).
Specify when exchanging routing information with an
adjacent router or access point by using the RIP func-
tion to create a route dynamically.
PDF取説-E̲1 02.1.23 10:28 ページ59