Icom MR-1220 Series Instruction Manual Download

Page: 68 / 80

OPEN SOURCE LICENSES

- gzdopen is not supported on RISCOS or BEOS.

- For PalmOs, see http://palmzlib.sourceforge.net/

Acknowledgments:

The deflate format used by zlib was defined by Phil Katz.

The deflate and zlib specifications were written by L.

Peter Deutsch. Thanks to all the people who reported

problems and suggested various improvements in zlib;

they are too numerous to cite here.

This software is provided 'as-is', without any express

or impliedwarranty. In no event will the authors be

held liable for any damages arising from the use of this

software.

Permission is granted to anyone to use this software

for any purpose, including commercial applications,

and to alter it and redistribute it freely, subject to the

following restrictions:

1. The origin of this software must not be

misrepresented; you must not claim that you wrote

the original software. If you use this software in

a product, an acknowledgment in the product

documentation would be appreciated but is not

required.

2. Altered source versions must be plainly marked as

such, and must not be misrepresented as being the

original software.

3. This notice may not be removed or altered from any

source distribution.

Jean-loup Gailly Mark Adler

[email protected] [email protected]

If you use the zlib library in a product, we would

appreciate *not* receiving lengthy legal documents to

sign. The sources are provided for free but without

warranty of any kind. The library has been entirely

written by Jean-loup Gailly and Mark Adler; it does not

include third-party code.

If you redistribute modified sources, we would appreciate

that you include in the file ChangeLog history information

documenting your changes. Please read the FAQ for

more information on the distribution of modified source

versions.

■

About "keyutils"

Reserved.

Written by David Howells ([email protected])

This program is free software; you can redistribute it and/

or modify it under the terms of the GNU Lesser General

Public License as published by the Free Software

Foundation; either version 2 of the License, or (at your

option) any later version.

■

About "libcap"

Unless otherwise *explicitly* stated, the following

text describes the licensed conditions under which

the contents of this libcap release may be used and

distributed:

Redistribution and use in source and binary forms

of libcap, with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain any existing

its entirety, including the disclaimer of warranties.

2. Redistributions in binary form must reproduce all prior

and current copyright notices, this list of conditions,

and the following disclaimer in the documentation and/

or other materials provided with the distribution.

3. The name of any author may not be used to endorse

or promote products derived from this software without

their specific prior written permission.

ALTERNATIVELY, this product may be distributed under

the terms of the GNU General Public License (v2.0 - see

below), in which case the provisions of the GNU GPL

are required INSTEAD OF the above restrictions. (This

clause is necessary due to a potential conflict between

the GNU GPL and the restrictions contained in a BSD-

style copyright.)

THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY

EXPRESS OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT

OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY

WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

■

About "libevent"

edu>

Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

1. Redistributions of source code must retain the

above copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other

materials provided with the distribution.

3. The name of the author may not be used to endorse or

promote products derived from this software without

specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS

IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT

OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY

WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

■

About "libftdi"

The C library "libftdi" is distributed under the GNU

Library General Public License version 2.

A copy of the GNU Library General Public License

(LGPL) is included in this distribution, in the file

COPYING.LIB.

The C++ wrapper "ftdipp" is distributed under the GNU

General Public License version 2 (with a special exception

described below).

A copy of the GNU General Public License (GPL) is

included

in this distribution, in the file COPYING.GPL.

As a special exception, if other files instantiate templates

or use macros or inline functions from this file, or you

compile this file and link it with other works to produce a

work based on this file, this file does not by itself cause

the resulting work to be covered by the GNU General

Public License.

However the source code for this file must still be made

available in accordance with section (3) of the GNU

General Public License.

This exception does not invalidate any other reasons why

a work based on this file might be covered by the GNU

General Public License.

■

About "libusb"

libusb is covered by the LGPL:

This library is free software; you can redistribute it and/

or modify it under the terms of the GNU Lesser General

Public License as published by the Free Software

Foundation; either version 2 of the License, or (at your

option) any later version.

This library is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the

implied warranty of MERCHANTABILITY or FITNESS

FOR A PARTICULAR PURPOSE. See the GNU Lesser

General Public License for more details.

You should have received a copy of the GNU Lesser

General Public License along with this library; if not,

write to the Free Software Foundation, Inc., 59 Temple

Place - Suite 330, Boston, MA 02111-1307, USA.

Alternatively, the files usb.h.in and/or usb.h may be

licensed under the BSD license:

Redistribution and use in source and binary forms, with

or without modification, are permitted provided that the

following conditions are met:

1. Redistributions of source code must retain the

above copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the

above copyright notice, this list of conditions and the

following disclaimer in the documentation and/or other

materials provided with the distribution.

3. The name of the author may not be used to endorse or

promote products derived from this software without

specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS

IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR

ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT

OF SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY

THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING

NEGLIGENCE OR OTHERWISE) ARISING IN ANY

WAY OUT OF THE USE OF THIS SOFTWARE,

EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

■

About "libusb1"

libusb

libusb is a library for USB device access from Linux

userspace.

It is written in C and licensed under the LGPL-2.1 (see

COPYING).

libusb is abstracted internally in such a way that it can

hopefully be ported to other operating systems. See

the PORTING file for some information, if you fancy a

challenge :)

libusb homepage: http://libusb.sourceforge.net

Developers will wish to consult the API documentation:

http://libusb.sourceforge.net/api-1.0/

Use the mailing list for questions, comments, etc:

https://sourceforge.net/mailarchive/forum.php?forum_

name=libusb-devel

- Daniel Drake <[email protected]>

(use the mailing list rather than mailing developers

directly)

■

About "iana-etc"

Open Software License ("OSL") v. 3.0

This Open Software License (the "License") applies to

any original work of authorship (the "Original Work")

whose owner (the "Licensor") has placed the following

licensing notice adjacent to the copyright notice for the

Original Work:

Licensed under the Open Software License version 3.0

CREDITS

The iana-etc maintainer is Seth W. Klein <sk@

sethwklein.net>.

Thanks go to all the Linux From Scratch users who wrote

the scripts that inspired the, now obsolete, LFS HINT and

who reported bugs against that HINT.

Thanks also go to the following people who have

reported bugs in iana-etc or made feature requests.

Oden Eriksson <[email protected]>

Gave me an idea of what distributions need from the

project.

Pascal S. de Kloe <[email protected]>

Reminded me that command options must come first

on many non-GNU systems.

Paul Jarc <[email protected]>

Reported that the install target didn't create the

installation directory.

Summary of Contents for MR-1220 Series

















































































Search results

Summary of Contents for MR-1220 Series

Reviews:

Related manuals for MR-1220 Series

Brands by name

Popular brands

Icom MR-1220 Series, Instruction Manual

Search results

Summary of Contents for MR-1220 Series

Reviews:

Related manuals for MR-1220 Series

Brands by name

Popular brands