Icom MR-1220 Series Instruction Manual Download

Page: 42 / 80

You can customize the radar settings infrequently

changed values or function settings.

Example: Turning the Key Beep ON or OFF

[MENU]/[

] > System >

Key Beep

1. Push [MENU]/[

The menu screen is displayed.

The Menu screen disappears 10 seconds after the

last operation.

Push [◄] or [►] to select the “System” menu.

Push [▲] or [▼] to select the “Key Beep” item, and

then push [ENTER]/[

Push [▲] or [▼] to select “ON” or “OFF,” to

turn the key beeps ON or OFF, and then push

[ENTER]/[

] to apply.

5. Push [MENU]/[

] to exit the menu screen.

Using the Menu screen

MENU SCREEN

Menu

Description

Reference

Brilliance & Color

Customizes the display color and brilliance such as the background, range

rings, displayed symbols.

p. 38

Trail

The detailed settings on trails or resets the trail.

p. 14

Display

Selects the displayed information in the PPI area, such as waypoint, marks,

DSC information, or customizes your own track.

p. 38

Target

Settings for the AIS or ARPA targets such as CPA/TCPA alarm, entering

favorite or blocking targets.

p. 39

ARPA

Sets details on the simplified ARPA (Automatic Radar Plotting Aids) or resets

the acquired targets.

p. 32

AIS

Customizes the AIS (Automatic Identification System) information display.

p. 28

Video

Scanning and Video tuning settings to get a clear PPI.

p. 40

System

Settings for the radar operation basics, such as the Key Beep, Zone Alarms,

Bearing type, Manual Variation, display in the Standby mode.

p. 40

Initial

The initial settings of the radar, such as the distance and speed units, date

format, language, bearing input source, heading adjustment, and so on.

You can also back up or restore the settings, or reset to the factory default in

this menu.

p. 42

DSC List

Displays the received DSC (Digital Selective Calling) list and each details.

p. 43

AIS List

Displays the received AIS information.

p. 43

Own AIS

Displays AIS information of your vessel.

p. 43

Status

Displays the status of the GPS, Heading and AIS inputs, alarm settings, and

CPA/TCPA alarm settings.

p. 43

Port Monitor

Displays status of the input/output ports.

p. 43

Scanner Monitor

Displays the scanner status.

p. 43

Safety Message

Lists the received AIS messages.

p. 43

Summary of Contents for MR-1220 Series

















































































Search results

Summary of Contents for MR-1220 Series

Reviews:

Related manuals for MR-1220 Series

Brands by name

Popular brands

Icom MR-1220 Series, Instruction Manual

Search results

Summary of Contents for MR-1220 Series

Reviews:

Related manuals for MR-1220 Series

Brands by name

Popular brands