Icom MR-1220 Series Instruction Manual Download

Page: 54 / 80

INSTALLATION AND CONNECTIONS

Installing the scanner unit (Open array types)

Installing the scanner unit (Open array types)

For the SC-T40, SC-T60, and SC-T60L open array type scanner units.

Mounting the scanner unit

WARNING! TURN OFF

the display unit

whenever you are working with the scanner

unit.

1. Using the Open array scanner unit template that is

supplied with the scanner unit, drill 4 holes 12 mm

(0.47 inch) in diameter, where you want to mount

the scanner unit.

2. If the mounting surface or platform is metal, apply

a sealing compound around the holes to prevent

corrosion and water ingress.

3. Mount the scanner unit in place using the supplied

bolts (M10 × 40 mm), flat washers, and spring

washers.

Secure the bolts firmly.

R5.5 (0.22)

20.5 (0.81)

11 (0.43)

262 (10.31)

302 (11.89)

248 (9.76)

370 (14.57)

190 (7.48)

200 (7.87)

116.5 (4.59)

SC-40T/SC-60T: 1192 (46.93), SC-60TL:1979 (77.91)

190 (7.48)

400 (15.75)

395 (15.55)

Ship’s bow

Unit: mm (inch)

Summary of Contents for MR-1220 Series

















































































Search results

Summary of Contents for MR-1220 Series

Reviews:

Related manuals for MR-1220 Series

Brands by name

Popular brands

Icom MR-1220 Series, Instruction Manual

Search results

Summary of Contents for MR-1220 Series

Reviews:

Related manuals for MR-1220 Series

Brands by name

Popular brands