20
DISTaNCE aND DIRECTION MEaSuREMENTS
3
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
Advanced measurements
D
Measuring the distance and direction between two targets
using both Electronic Bearing Lines (EBL) and both Variable Range Markers (VRM), the following advanced
measurements can be made.
1. Move the cursor onto a target.
2.
Push [EBL 1 (VRM 1)]/[
] to display
the EBL 1 and VRM 1 markers.
3.
Push [◄] or [►] to rotate the Electronic Bearing
Line (EBL), and push [▲] or [▼] to increase or
decrease the Variable Range Marker’s (VRM) ring
size.
4.
Push [ENTER]/[
] to apply the EBL/VRM 1
setting.
5. Move the cursor onto another target.
6.
Push [EBL 2 (VRM 2)]/[
] to display
EBL 2 and VRM 2.
•
The center of EBL 2/VRM 2 is placed at the
intersection of EBL 1 and VRM 1.
7.
Push [◄] or [►] to rotate the Electronic Bearing
Line (EBL), and push [▲] or [▼] to increase or
decrease the Variable Range Marker’s (VRM) ring
size.
8.
The EBL/VRM 2 readout displays the distance
between two targets and the direction from the
first target to the other.
D
Measuring the relative speed and course of a target
1.
Push [TRAIL]/[
] to turn ON the Trail
function, and wait until the set trail time expires.
L
The Trail Time is displayed in the upper left of the screen.
2. Move the cursor onto the end of the trail of a
target.
3.
Push [EBL 1 (VRM 1)]/[
] to display
the EBL 1 and VRM 1 markers.
4.
Push [◄] or [►] to rotate the Electronic Bearing
Line (EBL), and push [▲] or [▼] to increase or
decrease the Variable Range Marker’s (VRM) ring
size.
5.
Push [ENTER]/[
] to apply the VRM 1/EBL 1
setting.
6.
Push [EBL 2 (VRM 2)]/[
] to display
EBL 2 and VRM 2, and then place them on the
current position of the same target.
•
The center of EBL 2/VRM 2 is placed at the
intersection of EBL 1 and VRM 1.
VRM 2 shows the target movement that can be
converted into the relative target speed.
For example, when the Trail Time is 6 minute,
multiplying the distance by ten gives the relative
average speed of the target, and the EBL 2 displays
the course direction of the target.
L
If your vessel is stationary during the plot time, converted
value shows the absolute speed and direction of the target.
EBL 1
marker
VRM 2
marker
EBL 2
marker
VRM 1
marker
EBL 1/VRM 1
readout
EBL 2/VRM 2
readout
EBL 1
marker
VRM 2
marker
EBL 2
marker
VRM 1
marker
EBL 1/VRM 1
readout
EBL 2/VRM 2
readout
Summary of Contents for MR-1220 Series
Page 1: ...INSTRUCTION MANUAL MARINE RADAR MR 1220 series ...
Page 73: ...MEMO ...
Page 74: ...MEMO ...
Page 76: ......
