Icom MR-1210RII, Instruction Manual

Page: 68 / 80

63
EXTERNAL DATA LIST
The following external bearing, speed, position and waypoint data is (are) required, when you use the radar func-
tions.
EXTERNAL DATA INPUT
[NMEA1]*
1
connector [NMEA2]*
1
connector
“THS,” “HDG,”
“HDM,” “HDT”
“VDM”,
“ALR”
“VDO”*
2
“RMC,” “GGA,” “GLL,” “GNS,”
“VTG,” “WPL,” “BWC,” “BWR”
N+1, AUX
FUNCTION DISPLAY BEARING
VARI-
ATION
AIS SPEED POSITION WAYPOINT
VARI-
ATION
HEAD UP H-UP
— — — — — — —
STABILIZED HEAD UP SH-UP Required
— — — — — —
COURSE UP C-UP Required
— — — — — —
NORTH UP N-UP Required
— — — — — —
TRUE MOTION TM Required
— — —
“RMC,” “GGA,” “GLL,” or “GNS”
— —
SPEED DISPLAY SOG
— — —
“RMC” or “VTG”
— — —
HEADING BEARING HDG Required
— — — — — —
WAYPOINT WPT Required
— — —
“RMC,” “GGA,” “GLL,” or “GNS”
“WPL,”
“BWC,” or
“BWR”
—
OWN VECTOR
—
Required
— —
“RMC” or “VTG”
— — —
ATA ATA Required
— —
“RMC” or “VTG”
— — —
Cursor/Waypoint
Estimated Time of Arrival
— — — —
“RMC” or “VTG”
— — —
MAGNETIC VARIATION
(AUTO) *
4
— —
“HDG”
— — — —
“RMC”
TLL
—
Required
— — —
“RMC,” “GGA,” “GLL,” or “GNS”
— —
AIS (Display only) AIS Required
—
“VDM”
—
“RMC,” “GGA,” “GLL,” or “GNS”
— —
AIS (CPA/TCPA Alarm) AIS Required
—
“VDM” “RMC” or “VTG” “RMC,” “GGA,” “GLL,” or “GNS”
— —
AIS (OWN) MENU
— —
“VDO”
— — — —
Alarm status* 3
— — —
“ALR”
— — — —
EXTERNAL DATA OUTPUT
—
[NMEA2]* 1 connector
— — —
“RMC,” “GGA,” “GLL,” “VTG,” “TTM,” “TLL,” “RSD,” “OSD”
* 1 [NMEA1] and [NMEA2] connectors: See page 28.
* 2 AIS input also receives “RMC,” “GGA,” “GLL,” “VTG,” and “GNS” sentences.
If the NMEA2 input does not receive these, the sentences from the AIS input are used.
*
3 The system error is displayed from the AIS unit.
* 4 Either an “HDG” to [NMEA1] connector or an “RMC” to [NMEA2] connector is required.
• “THS,” “HDG,” “HDM,” “HDT,” “RMC,” “GGA,” “GLL,” “GNS,” “VTG,” “WPL,” “BWC,” “BWR,” “TTM,” “TLL,” “RSD,” and
“OSD” are sentences of NMEA0183.
• If the “Bearing Input” item in the Initial menu is set to “GPS” or “GPS-L,” “RMC” of [NMEA2] connector or COG
(Course Over the Ground) of “VTG” a bow it receives as a direction, even if there is no direction information (com-
pass etc.) in [NMEA1] connector, the screen display of the North rise etc. is possible.
However, direction accuracy falls when the speed of a vessel is set to 2 knots or less, or when exceeding 3 knots
a bow it does not receive as direction data. Moreover, the influence of measurement position accuracy or a cur-
rent an actual bow it may differ from a direction.
14