26
4
DISTANCE AND DIRECTION MEASUREMENTS
D
Using the Parallel index lines
q
Simultaneously hold down [EBL1(VRM1)]/
[
] and [EBL2(VRM2)]/[
]
for 1 second to display the Parallel index lines.
• The crossed lines are displayed.
w
Push [
p
] or [
q
] to increase or decrease the range
of lines, and [
t
] or [
u
] to rotate the lines.
• The direction of the parallel index lines and the range of
lines are displayed on the lower right of the screen.
e
Push [ENTER]/[
] to set lines.
r
Simultaneously hold down [EBL1(VRM1)]/
[
] and [EBL2(VRM2)]/[
]
for 1 second to clear the parallel index lines.
D
Using the variable range marker
q
Push [EBL1 (VRM1)]/[
] to display the
VRM1 and EBL1; then push [
p
] or [
q
] to set the
marker.
• The range between the vessel and the target is indicated
in the EBL/VRM1 readout
w
Push [ENTER]/[
] to set the EBL/VRM1 setting.
e
Push [EBL2 (VRM2)]/[
] to display the
VRM2 and EBL2; then push [
p
] or [
q
] to set the
marker.
• The range between the vessel and the target is
indicated in the EBL/VRM2 readout.
• When VRM1 and EBL1 are displayed, the cen-
ter of VRM2 appears at the intersection point of
VRM1 and EBL1.
r
Push [ENTER]/[
] to set the EBL/VRM2 setting.
t
Push [EBL1 (VRM1)]/[
] to clear the
EBL1 and VRM1.
y
Push [EBL2 (VRM2)]/[
] to clear the
EBL2 and VRM2.
Parallel
Index line
readout
Parallel
Index lines
