![background image](http://html1.mh-extra.com/html/icom/iv86/iv86_service-manual-addendum_4733731063.webp)
4-5
ADJUSTMENT
ADJUSTMENT ITEM
DISPLAY
SETTING CONDITION
OPERATION
TRANSMIT
OUTPUT POWER
-Verification-
(Extra High)
1
• Connect the RF power meter to the
antenna connector.
• While transmitting, adjust the
connected DC power supply
voltage to 7.5 V.
• Transmitting
4.5~6.5 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
2
6.0~8.0 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
3
4.5~6.5 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
(High)
4
5
6
(Middle)
7
2.0~3.0 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
8
9
(Low)
10
0.25~1.5 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
11
12
TRANSMITTING
CURRENT
-Verification-
1
• Connect the ammeter between the
JIG battery case and the DC power
supply.
• Transmitting
Less than 2.0 A
2
3
4
SPURIOUS
EMISSION
-Verification-
1
• Connect the spectrum analyzer to
the antenna connector through the
attenuator.
• Transmitting
Less than −60 dBc
2
3
4
4-2 TRANSMIT ADJUSTMENTS (CONTINUED)