![background image](http://html1.mh-extra.com/html/icom/iv86/iv86_service-manual-addendum_4733731002.webp)
The underlined parts have been updated from the previous version of the addendum, or from the original page.
(Amended page)
February 2021
4-1b
SECTION 4
ADJUSTMENT PROCEDURE
4-1 PREPARATION
REQUIRED EQUIPMENT
EQUIPMENT
GRADE AND RANGE
EQUIPMENT
GRADE AND RANGE
DC power supply
Output voltage:
7.5 V
Current capacity:
3 A or more
JIG battery case
Modified BP-263.
(See the illustration shown on page 4-2b.)
Frequency counter
Range:
0.1~300 MHz
Accuracy:
±1 ppm or better
JIG plug
Modified 3.5 mm (⅛ inch) stereo plug.
(See the illustration shown on page 4-2b.)
Attenuator
Attenuation:
30 dB or 40 dB
Capacity:
More than 10 W
JIG cable 1
Modified 2.5 mm (¹⁄10
inch) stereo plug.
(See the illustration shown on page 4-2b.)
Audio generator
(AG)
Frequency range:
300~3000 Hz
Output level:
1 ~ 500 mV
JIG cable 2
Modified 3.5 mm (⅛ inch) stereo plug.
(See the illustration shown on page 4-2b.)
RF power meter
(50 Ω terminated)
Measuring range:
0.1 ~ 10 W
Frequency range:
100 ~ 300 MHz
SWR:
Less than 1.2 : 1
Standard signal
generator (SSG)
Frequency range:
0.1 ~ 300 MHz
Output level:
−20 ~ 90 dBμV
(−127 to −17 dBm)
AC millivoltmeter
Measuring range:
10 mV to 10 V
Distortion meter
Measuring accuracy: 3% or less at 1 kHz
Input level:
50 mV to 10 V
Modulation analyzer
Frequency range:
30 ~ 300 MHz
Measuring range:
0 ~ ±10 kHz
External speaker
Input impedance: 8 Ω
Capacity:
More than 1 W
Spectrum analyzer
Measuring range:
Up to 3 GHz
Ammeter
Measuring range:
0 to 10 A
NOTE: For products with early serial numbers
Refer to the first edition of the
IC-V86/V86-T service manual (published in April 2019)
for the adjustment procedures.
[Applicable serial numbers]
Model Name Version Number
Serial Numbers
Model Name
Version Number
Serial Numbers
IC-V86
#11
11001001 ~ 11027100 IC-V86
#13
13001001 ~ 13004800
IC-V86
#12
12001001 ~ 12006100 IC-V86-T
#31
31001001 ~ 31004700
Standard signal generator
–20 to 90 dBµV
(–127 to –17 dBm)
CAUTION!
NEVER
transmit while
the SSG is connected to
the antenna connector.
JIG cable 2
: See the illustration shown on page 4-2b.
IC-V86/IC-V86-T/IC-G86
JIG cable 1
: See the illustration shown on page 4-2b.
Frequency counter
Loose
coupling
Attenuator
30 dB or 40 dB
Modulation analyzer
30~300 MHz/0 to ±10 kHz
RF power meter
0.1~
10 W/50 Ω
Spectrum analyzer
Up to 3 GHz
To [MIC]
To [SP]
JIG battery case
: See the illustration shown on page 4-2b.
For receive adjustments
For transmit adjustments
CONNECTIONS