![background image](http://html1.mh-extra.com/html/icom/iv86/iv86_service-manual-addendum_4733731061.webp)
4-3
■
ENTERING THE ADJUST MODE
1. Turn OFF the power.
2. Connect the JIG plug to the [SP] connector.
to [SP]
JIG plug
:
See the illustration
shown on page 4-2.
3. While holding down all [
▲
]/[
▼
] and [VFO/MR/CALL],
turn ON the transceiver power to enter the adjust mode.
[
▲
]
[
▼
]
[VFO/MR/CALL]
[POWER]
4. The adjust mode is displayed.
■
KEY ASSIGNMENTS FOR THE ADJUST MODE
• Push [
▲
] to select the next adjustment item, push [
▼
] to
select the previous adjustment item.
• Rotate [VOL] to set or modify the adjustment value.
• Push [# ENT]•[
] to store the adjusted value, or start
automatic adjustment.
• Push [
*
]•[FUNC] to briefly display the adjustment value.
[VOL]
Adjust the value for
the item
[
*
]•[FUNC]
Briefly displays
adjusted value
[# ENT]•[ ]
Stores adjusted value,
or starts automatic
adjustment
[
▲
]
Selects the next
adjustment item
[
▼
]
Selects the previous
adjustment item
■
ADJUST MODE SCREENS
Adjustment frequency
While rotating [VOL],
or when [
*
]•[FUNC] is pushed
Adjustment item
Adjusted value