![background image](http://html1.mh-extra.com/html/icom/iv86/iv86_service-manual-addendum_4733731004.webp)
4-3b
The underlined parts have been updated from the previous version of the addendum, or from the original page.
(Amended page)
February 2021
ENTERING THE ADJUST MODE
1. Turn OFF the power.
2. Connect the JIG plug to the [SP] connector.
to [SP]
JIG plug
:
See the illustration
shown on page 4-2b.
3. While holding down all [
▲
]/[
▼
] and [VFO/MR/CALL],
turn ON the transceiver power to enter the adjust mode.
[
▲
]
[
▼
]
[VFO/MR/CALL]
[POWER]
4. The adjust mode is displayed.
KEY ASSIGNMENTS FOR THE ADJUST MODE
• Push [
▲
] to select the next adjustment item, push [
▼
] to
select the previous adjustment item.
• Rotate [VOL] to set or modify the adjustment value.
• Push [# ENT]•[
] to store the adjusted value, or start
automatic adjustment.
• Push [
*
]•[FUNC] to briefly display the adjustment value.
[VOL]
Adjust the value for
the item
[
*
]•[FUNC]
Briefly displays
adjusted value
[# ENT]•[ ]
Stores adjusted value,
or starts automatic
adjustment
[
▲
]
Selects the next
adjustment item
[
▼
]
Selects the previous
adjustment item
ADJUST MODE SCREENS
Adjustment frequency
While rotating [VOL],
or when [
*
]•[FUNC] is pushed
Adjustment item
Adjusted value