![background image](http://html1.mh-extra.com/html/icom/iv86/iv86_service-manual-addendum_4733731062.webp)
4-4
4-2 TRANSMIT ADJUSTMENTS
ADJUSTMENT
ADJUSTMENT ITEM
DISPLAY
SETTING CONDITION
OPERATION
FREQUENCY
-Verification-
1
• Connect the RF power meter or
the dummy load to the antenna
connector.
• Loosely couple the frequency
counter to the antenna connector.
• Transmitting
146.000 MHz ±365 Hz
(If out of the specified range,
adjust the frequency by [VOL],
then push [# ENT]•[
].)
TRANSMIT
OUTPUT POWER
-Adjustment-
(Extra High)
1
• Connect the RF power meter to the
antenna connector.
• While transmitting, adjust the
connected DC power supply
voltage to 7.5 V.
• Transmitting
Set the transmit output power to
7.0 W ±0.2 W by [VOL], then push
[# ENT]•[
].
Note the adjusted value as the
reference value A.
(High)
2
Set the transmit output power to
5.5 W ±0.2 W by [VOL], then push
[# ENT]•[
].
Note the adjusted value as the
reference value B.
(Middle)
3
Set the transmit output power to
2.5 W ±0.2 W by [VOL], then push
[# ENT]•[
].
Note the adjusted value as the
reference value C.
(Low)
4
Set the transmit output power to
0.5 W ±0.1 W by [VOL], then push
[# ENT]•[
].
Note the adjusted value as the
reference value D.
(Extra High)
5
• Receiving
Set the adjustment value to the
value that add 2 to the reference
value B, then push [# ENT]•[
].
6
Set the adjustment value to the
value that add 6 to the reference
value A, then push [# ENT]•[
].
7
Set the adjustment value to the
value that add 10 to the reference
value B, then push [# ENT]•[
].
(High)
8
Set the adjustment value to the
value that add 2 to the reference
value B, then push [# ENT]•[
].
9
Set the adjustment value to
the value that subtract 2 to the
reference value B, then push
[# ENT]•[
].
10
Set the adjustment value to the
value that add 10 to the reference
value B, then push [# ENT]•[
].
(Middle)
11
Set the adjustment value to the
reference value C, then push
[# ENT]•[
].
12
Set the adjustment value to the
value that add 1 to the reference
value C, then push [# ENT]•[
].
13
Set the adjustment value to the
value that add 13 to the reference
value C, then push [# ENT]•[
].
(Low)
14
Set the adjustment value to the
reference value D, then push
[# ENT]•[
].
15
Set the adjustment value to the
value that add 2 to the reference
value D, then push [# ENT]•[
].
16
Set the adjustment value to the
value that add 10 to the reference
value D, then push [# ENT]•[
].