![background image](http://html1.mh-extra.com/html/icom/iv86/iv86_service-manual-addendum_4733731006.webp)
4-5b
The underlined parts have been updated from the previous version of the addendum, or from the original page.
(Amended page)
February 2021
ADJUSTMENT
ADJUSTMENT ITEM
DISPLAY
SETTING CONDITION
OPERATION
TRANSMIT
OUTPUT POWER
-Verification-
(Extra High)
1
• Connect the RF power meter to the
antenna connector.
• While transmitting, adjust the
connected DC power supply
voltage to 7.5 V.
• Transmitting
4.5~6.5 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
2
6.0~8.0 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
3
4.5~6.5 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
(High)
4
5
6
(Middle)
7
2.0~3.0 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
8
9
(Low)
10
0.25~1.5 W
(If out of the specified range,
adjust the output power by [VOL],
then push [# ENT]•[
].)
11
12
TRANSMITTING
CURRENT
-Verification-
1
• Connect the ammeter between the
JIG battery case and the DC power
supply.
• Transmitting
Less than 2.0 A
2
3
4
SPURIOUS
EMISSION
-Verification-
1
• Connect the spectrum analyzer to
the antenna connector through the
attenuator.
• Transmitting
Less than −60 dBc
2
3
4
4-2 TRANSMIT ADJUSTMENTS (CONTINUED)