Icom IC-M801E Instruction Manual Download

Page: 62 / 80

CONNECTION AND INSTALLATION

2001 NEW

Mounting angle attachment

Attach the supplied rubber feet to the mounting
angle, if desired.

Attach the mounting angles using with the supplied
hex head bolts

(M6

15)

, flat and spring washers as

illustrated below.

Hex head bolt (M6

15)

Flat washer

Mounting angle

Spring washer

Mounting the main unit

Hex head bolt (M6

50)

Flat washer

Spring washer

Nut (M6)

Flat washer

Spring washer

Drill six holes of 6 mm (

⁄

in)

in diameter.

WARNING! NEVER

mount

the transceiver main unit overhead.
The weight of the unit is approxi-
mately 8.5 kg, but its apparent weight
will increase several fold due to wave
shocks or vibration. The unit must be
mounted on a flat hard surface only.

IC-M801E_0.qxd 05.12.2 16:32 Page 54

Summary of Contents for IC-M801E

















































































Search results

Summary of Contents for IC-M801E

Reviews:

Related manuals for IC-M801E

Brands by name

Popular brands

Icom IC-M801E, Instruction Manual

Search results

Summary of Contents for IC-M801E

Reviews:

Related manuals for IC-M801E

Brands by name

Popular brands