![background image](http://html1.mh-extra.com/html/icom/ic-m801e/ic-m801e_instruction-manual_2038017057.webp)
49
12
CONNECTION AND INSTALLATION
12
■
Basic connections
CAUTION:
• After connecting the external speaker, antenna and
tuner control cables, cover the connectors with a
rubber vulcanizing tape, etc., as shown below, to
prevent water seeping into the connector.
•
DO NOT
pull the antenna and control cable recep-
tacles. This may cause cable disconnection (in the
tuner unit), inside connector damaged or a bad
connection.
NOTE:
Turn [DC ISOLATE]
(on the IC-M801E main unit)
OFF,
or charge the battery during anchor, otherwise the
battery may be exhausted.
The IC-M801E has a high-stability oven-heater type
crystal oscillator, and the oscillator’s heater is con-
nected to the DC power terminals directly, it keeps
its temperature to at the specified level even if the
transceiver power with the remote controller has
turned OFF.
Rubber vulcanizing tape
HF antenna
(for DSC reception)
Grounding
(see pgs. 51)
Grounding
(see p. 51)
12 V or 24 V
battery
[DC ISOLATE]
External
speaker
Remote
controller
Transceiver’s
main unit
AT-141
IC-M801E_0.qxd 05.12.2 16:32 Page 49
Summary of Contents for IC-M801E
