Icom IC-M801E Instruction Manual Download Page 72

Page: 72 / 80

OPTIONS

2001 NEW

AT-141

HF AUTOMATIC ANTENNA TUNER

Matches the transceiver to a long wire
antenna with a minimum of insertion loss.

RC-25E

REMOTE CONTROLLER

Same as that supplied remote with the
transceiver. Mounting bracket, MB-81, is
supplied with the controller.

SP-24E

EXTERNAL SPEAKER

Same as that supplied with the trans-
ceiver. Mounting bracket, MB-82 is sup-
plied with the speaker.
Max. AF input/impedance: 5 W/4

Ω

MB-75

FLUSH MOUNT KIT

For mounting the remote controller (RC-
25E) or the SP-24E to a panel.

HS-98

HANDSET

Same as that supplied with the IC-
M801E.

OPC-1465

SHIELDED CONTROL CABLE

Shielded control cable protects the trans-
ceiver from RF feedback and extends the
separation between AT-141 and transceiver
up to 10 m .

OPC-1466

SEPARATION CABLE

Same as that supplied with the transceiver.
Cable length: 5 m

HM-135

HAND MICROPHONE

Equipped with channel up/down and
user-programmable keys.

MB-108

MOUNTING BRACKET

One-touch bracket. Transceiver main unit
easily attached or removed.

IC-M801E_0.qxd 05.12.2 16:33 Page 64

Summary of Contents for IC-M801E

















































































Search results

Summary of Contents for IC-M801E

Reviews:

Related manuals for IC-M801E

Brands by name

Popular brands

Icom IC-M801E, Instruction Manual

Search results

Summary of Contents for IC-M801E

Reviews:

Related manuals for IC-M801E

Brands by name

Popular brands