Icom IC-M801E, Instruction Manual

Page: 45 / 80

9
37
MEMORY OPERATION
2001 NEW
9
8
■
Memory description
The IC-M801E has several kinds of memories as fol-
lows:
• Address and group ID code memories (p. 38)
• Call, traffic and scan frequency memories (p. 39)
• DSC transmission memory (described in this section)
• Received message memory (p. 30)
■
Memory writing
10 DSC transmission memory channels allow you to
set often used format specifiers and contents such as
for routine calls, group calls, etc.
q
During DSC watch mode, select the desired format
category (except distress and test), and set the
message, traffic and call frequencies until the call
stand-by screen is displayed as described in the
CALL PROCEDURE section (pgs. 20–27).
w
Push and hold [ENT] for 1 sec. to select the TX
memory write condition.
e
Rotate [CH] to select the desired memory channel.
r
Push and hold [ENT] for 1 sec. again to store the
condition into the selected memory channel.
• The set DSC format and calling station ID/name ap-
pear.
t
Push [ENT] to return to the calling stand-by condi-
tion, or push [MODE
SET
] to return to DSC watch
mode.
- - - T X m e m o r y w r i t e - - - -
0 : I n d i v i d u a l 9 8 7 6 5 4 3 2 1
1 :
2 :
3 :
4 :
5 :
Ç
O K S E L
- - - T X m e m o r y w r i t e - - - -
0 :
1 :
2 :
3 :
4 :
5 :
Ç
W r i t e S E L
■
Memory reading/transmitting/deleting
q
Push [DSC] to select DSC watch mode, if neces-
sary.
w
Push [TX
TXF
] to enter the DSC transmit memory
screen.
• Or, push [MODE
SET
], rotate [CH] to select “ TX
memory ” then push [ENT], also selects the transmit
memory screen.
e
Rotate [CH] to select the selected memory chan-
nel to be read.
r
Push [ENT] to display the memory contents.
t
Operate as follows:
➥
When reading the memory contents only;
• Push [MODE
SET
] to return to DSC watch
mode.
➥
When transmitting the memory contents;
• Push and hold [CALL] for 1 sec.
➥
When clearing the memory contents;
• Push and hold [CE] for 1 sec.
* * * * * * T X m e m o r y * * * * * * *
- - - - - - I n d i v i d u a l - - - - - -
T o : 9 8 7 6 5 4 3 2 1
C a t e g o r y : R o u t i n e
T r a f f i c : J 3 E
T X 2 1 3 4 . 0 k H z
R X 2 1 3 4 . 0 k H z
C a l l F r e q : T X 2 1 8 7 . 5 k H z
R X 2 1 8 7 . 5 k H z
D E L C a l l
* * * * * * T X m e m o r y * * * * * * *
- - - - - - - - S e l e c t - - - - - - - -
0 : I n d i v i d u a l 9 8 7 6 5 4 3 2 1
1 :
2 :
3 :
4 :
5 :
Ç
O K S E L
IC-M801E_0.qxd 05.12.2 16:32 Page 37