12
4
MENU SCREEN
New2001
*
1
May not be displayed, depending on the version.
*
2
Not displayed, when valid GPS data is received.
*
3
Displayed only when the voice scrambler unit is installed.
Noise Cancel
•
RX
Set the reduction level of
the Noise Cancel function.
•
TX
Turn the Noise Cancel
function for the transmit
signal ON or OFF.
Power SW from Sub Unit
•
All Units
When you turn OFF the
command head, the
transceiver is turned OFF
at the same time.
•
Own Unit
The transceiver is not
turned OFF even if you
turned OFF the command
microphone.
•
Received Call Log
Displays the received
call log.
Transmitted Call
Log
Displays the transmitted
call log.
•
Scan Type*
4
Select a Scan Type from
Normal Scan or Priority
Scan.
Scan Timer*
4
Turn the Scan Timer
function ON or OFF.
Dual/Tri-Watch*
4
Select the Dualwatch or
Tri-watch function.
Channel Group
Select a channel group.
Call Channel
Set the Call channel.
WX Alert*
1
Turn the Weather Alert
function ON or OFF.
Voice Scrambler*
3
Set the Voice Scrambler
code.
Voice Record
Select whether or not to
automatically record the
voice audio.
FAV Settings
Set the Favorite channel
settings.
FAV on MIC
Turn the FAV on MIC
function ON or OFF.
•
Position Input*
2
Enter your position.
Individual ID
Enter an Individual ID.
Group ID
Enter a Group ID.
Auto ACK
Select whether or not to
automatically transmit an
Acknowledgement after
receiving each type of call.
CH Auto Switch
Select whether or to
automatically select the
channel that the DSC
call is received on, when
received.
DSC Data Output
Select a DSC Data Output
option.
Alarm Status
•
Safety
Turn the Alarm Status for
Safety ON or OFF.
•
Routine
Turn the Alarm Status for
Routine ON or OFF.
•
Warning
Turn the Alarm Status for
Warning ON or OFF.
•
Self-Terminate
Turn the Alarm Status for
Self-Terminate ON or OFF.
•
Discrete
Turn the Alarm Status for
Discrete ON or OFF.
CH 70 SQL Level
Select the Channel 70
squelch level.
Self Check Test
Starts the self check Test.
Procedure*
1
Select the Single task
mode or Multiple task
mode.
•
North Up/COG Up
Select the display type
for AIS plotter.
CPA/TCPA
Edit the alarm settings for
AIS receiver.
ID Blocking
Enter the vessel’s or your
transponder ID to block.
•
NMEA Settings (p. 91)
NMEA0183
•
Port 1, Port 2
Select the data transfer
speed to receive and
transmit data from
external devices.
NMEA2000
•
GPS, AIS
Select the sensors in
NMEA 2000 network
which sends GPS or AIS
data to the transceiver.
•
Displays your transceiver
’
s Serial number,
software version, GPS module version, and
so on.
■
Construction (Continued)
*
4
Not usable in Dutch version.
