background image

76

10

AIS RECEIVER

New2001

 

D

Danger list screen

In the target list display, push [Display] 

 

to switch to the 

danger list screen, which helps you to find any dangerous 

target whose CPA is within 6 nm (nautical miles) and TCPA 

is within 60 minutes of your vessel.

•  Rotate [CH/ENT] to select an AIS target.
•  Push [INFO] to display the detail screen of the selected AIS target. 
•  Push [DSC] to transmit DSC call to selected AIS target. 

q

w

q

 THE NUMBER OF DANGEROUS TARGETS

   Displays the number of AIS targets which are being 

detected by the transceiver.

w

 DANGER TARGET INFORMATION

  Displays the following dangerous target information:

  • MMSI code or name.

  • CPA: Closest Point of Approach (unit: nautical mile).

  • TCPA: Time to CPA (unit: minute).

 

About the 

detail screen

The detail screen displays the information about the selected 

AIS target. The contents differ, depending on the AIS class.

1.   Select an AIS target in the target list screen, danger list 

screen, or plotter screen then push [INFO] or [ENT].

 

• The detail screen is displayed.

 

•  Rotate [CH/ENT] to scroll the page.

Summary of Contents for IC-M605E































































































































Reviews: