![background image](http://html1.mh-extra.com/html/icom/ic-m605e/ic-m605e_instruction-manual_4733552066.webp)
56
8
DSC OPERATION
New2001
[Ignore]*:
Ignores the Call and returns to the
Main screen.
* Displayed only when “Single” is selected
in the PROCEDURE menu. (p. 64)
[Hold]:
Holds the RX call task, and returns
to the Main screen.
[ACK (Unable)]:
Sends an acknowledgment with no
position and time data.
[ACK (Able)]:
Sends an acknowledgment with
position and time data.
[Accept]:
Enters the DSC Task mode.
•
Rotate [CH/ENT] to view the call contents.
4.
Push [Standby]
to return to
the Main screen.
TIP:
See page 43 for details of
sending an acknowledgement.
Example:
Receiving a Test call
1. When a call is received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
•
“
” blinks.
2.
Push any [Alarm Off]
.
3.
Select your action.
NOTE:
When “Test ACK” or “Polling
ACK” is set to “Auto,” the transceiver
automatically replies to the call. Both
the TX and RX calls are stored in the
Transmitted and Received Call Logs.
D
Receiving a Test call
/Polling Request call*
*For only the USA version.
1.
When a Position Request call is
received:
• Alarm sounds.
• The following screen is displayed
and the backlight blinks.
2.
Push any [Alarm Off]
.
3.
Select your action.
D
Receiving a Position
Request call
NOTE:
When “Position ACK” is set to
“Auto,” the transceiver automatically
replies to the call. Both the TX and RX
calls are stored in the Transmitted and
Received Call Logs. (Default: Manual)
■
Receiving DSC calls (Continued)