Icom IC-M605E Instruction Manual Download

Page: 18 / 126

New2001

PANEL DESCRIPTION

New2001

■

Function display (Main screen) (Continued)

Information area

The MMSI code* and the following indicators are displayed

in the Information area.

* ATIS code is displayed if only the ATIS code is entered in Dutch

and German version.

Indicator

Description

Displayed when receiving a signal or when the

squelch is open.
Displayed while transmitting.

25W

Displayed when high power is selected.

Displayed when low power is selected.

USA, INT,

CAN, WX,

ATIS, DSC

•

Displays the selected channel group. (p. 15)

•

“WX” is displayed when the weather channel

is selected.

Displayed when the transceiver receives valid

position and time data.

Blinks when invalid GPS data is being received.

•

Displayed when there are unread DSC

messages.

•

Blinks when a DSC message is received.

Displayed when the “CH Auto Switch” in DSC

Settings is set to an option except “Accept.”
Displayed when the external speaker is

selected. (p. 87)
Displayed when the Auto Foghorn function is

activated. (p. 69)

Status area

The current status is displayed in the Status area.

Indicator

Description

SCAN 16

Displayed during a Priority scan. (p. 23)*

SCAN

Displayed during a Normal scan. (p. 23)*

DUAL 16

Displayed during Dualwatch. (p. 24)*

TRI 16

Displayed during Tri-watch. (p. 24)*

LOCAL

Displayed when the Attenuator function is

turned ON.

*For only the USA version.

Displayed when in the RX Hailer mode.

(p. 68)

•

Displayed when recorded audio is played or

stopped. (p. 72)

•

Displayed when received audio is recorded.

(p. 72)

*Not usable in Dutch version.

Summary of Contents for IC-M605E































































































































Search results

Summary of Contents for IC-M605E

Reviews:

Related manuals for IC-M605E

Brands by name

Popular brands

Icom IC-M605E, Instruction Manual

Search results

Summary of Contents for IC-M605E

Reviews:

Related manuals for IC-M605E

Brands by name

Popular brands