Icom IC-M605E Instruction Manual Download

Page: 108 / 126

CONNECTIONS AND MAINTENANCE

New2001

■

Mounting the transceiver

The universal mounting bracket supplied with your

transceiverenablesoverheadorflatmounting.
•

Mount the transceiver securely with the 5 supplied (M5 × 20)

screws to a surface that is more than 10 mm thick and can

support more than 5 kg.

•Mountthetransceiversoitsfaceisat90°toyourlineof

sight when operating.

CAUTION:

Keep the transceiver and microphone at least

1 meter (3.3 feet) away from your vessel’s magnetic

navigation compass.

NOTE:

•Checktheinstallationangle.Thefunctiondisplaymaynot

be easy to read at some angles.

•

When mounting the transceiver on the place that is prone

to strong vibration, use the supplied sponges between the

transceiver and mounting bracket to reduce the vibration.

Sponges reduce the vibration effects.

See NOTE shown to the left.

Sponge*

Summary of Contents for IC-M605E































































































































Search results

Summary of Contents for IC-M605E

Reviews:

Related manuals for IC-M605E

Brands by name

Popular brands

Icom IC-M605E, Instruction Manual

Search results

Summary of Contents for IC-M605E

Reviews:

Related manuals for IC-M605E

Brands by name

Popular brands