20
4
SELCALL/ALE OPERATION
4
The Selcall function allows you to make individual or
group calls. Each transceiver is assigned an individual
ID (identification) and can be called using this ID.
•
Preparation for a Selective call
Send a Channel Test call on several Selcall channels,
and check the propagation on each one to select the
channel with the best signal quality. (p. 30)
• Sending a Selective call
q
With the Memory Channel displayed, push
[
]
to
enter the Call select menu.
w
Push
[
t
]
(
§
) or
[
u
]
(
§§§
) to set the Call to “SEL-
CALL,” then push
[
]
to enter the Selcall menu.
e
Push
[
t
]
(
§
) or
[
u
]
(
§§§
) to set the Call type to “SE-
LECTIVE.”
• “SELECTIVE,” “PHONE,” “MESSAGE,” “SEND POSITION,”
“GET POSITION,” “GET STATUS,” “EMERGENCY” and
“CHANNEL TEST” are selectable.
r
Push
[
]
to go to the next screen.
• Push
[HOME]
to return to the previous screen.
❍
Call ID input
Push the numeric keys to enter the Call ID.
• Push
[
8
]
to delete the number.
• This Call ID is not stored in the Call ID list.
❍
Call ID selection
➥
Push
[List]
(
§§
) to enter the list selection
mode.
➥
Push
[
t
]
(
§
) or
[
u
]
(
§§§
) to select the Call ID.
• Push
[Edit]
(
§§
) to return to the direct input mode.
t
Push
[
]
to go to the next screen.
• Push
[HOME]
to return to the previous screen.
❍
Network selection
Push
[
t
]
(
§
) or
[
u
]
(
§§§
) to select the Network.
y
Push
[
]
to go to the next screen.
• Push
[HOME]
to return to the previous screen.
❍
Self ID selection
Push
[
t
]
(
§
) or
[
u
]
(
§§§
) to select the Self ID.
❍
Self ID input
➥
Push
[Edit]
(
§§
) to enter the direct input mode.
➥
Push the numeric keys to enter the Self ID.
• Push
[
8
]
to delete the number.
• This Self ID is overwritten or stored in the Self ID list.
• Push
[List]
(
§§
) to return to the list selection mode.
u
Push
[
]
to enter the Channel Menu, and then
push
[
t
]
(
§
) or
[
u
]
(
§§§
) to select the desired operat-
ing channel.
• Push
[HOME]
to return to the Selcall menu.
i
Push
[
]
to transmit the Selective call. The call is
stored in the Call Out memory.
• While calling, push
[PTT]
to cancel the call.
You can also transmit a Selective call when the Sel-
call Address is displayed. In this case, you can skip
steps
q
to
t
above, after selecting the Selective
call address.
•
Receiving Selective calls
When your transceiver receives a Selective call with
your individual ID, it automatically responds by trans-
mitting. The received Selcall is stored in the Call In
memory.
q
After receiving a Selective call, and push any key
to enter the Call In memory screen.
w
Push
[More]
(
§§§
) or
[Prev]
(
§
) to select the informa-
tion.
e
Push
[Home]
to return to the normal operating
screen.
ï
Selective call