![background image](http://html.mh-extra.com/html/icom/ic-f8100/ic-f8100_instruction-manual_612669063.webp)
58
6
CONNECTION AND INSTALLATION
2001 NEW
6
■
Fuse replacement
If a fuse blows, or the transceiver stops functioning,
find the source of the problem, and repair it. Then re-
place the damaged fuse with a new, adequately rated
fuse.
R
WARNING!
Turn OFF the power and discon-
nect the DC power cable from the transceiver before
performing any work on the transceiver. Otherwise,
there is a danger of electric shock, equipment dam-
age and/or fire or injury.
The IC-F8100 has two fuse types installed for trans-
ceiver protection.
• DC power cable
........................................ ATC 30 A
• Circuitry fuse
.............................................. ATC 5 A
D
Internal fuse replacement
q
Turn the transceiver upside down.
w
Unscrew 4 screws from the bottom cover, then lift
up the cover.
e
Replace the circuitry fuse as shown in the diagram
below.
• Use the supplied ATC 5 A fuse.
r
Reattach the bottom cover in its original position.
D
DC power cable fuse replacement
Refer the figure described below for the DC power
cable fuse replacement.
ATC 30 A fuse