2001 NEW
50
6
CONNECTION AND INSTALLATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Quic
k Ref
erence
AT-140
OPC-2205
Ground
IC-F8100 main unit
to a 13.8 V
DC power source
to a
GPS receiver
to [ACC2]
to [ACC1]
OPC-2142
(10 m; 32.8 ft): 4 pin
Ground
(see page 51)
AT-140
AT230
Ground
(see page 51)
Ground
(see page 51)
IC-F8100 main unit
OPC-2142 (10 m; 32.8 ft): 4 pin
OPC-2143 (5 m; 16.4 ft)
to a 13.8 V
DC power source
to
[ACC2]
to
[ACC1]
AD-119
DO NOT
stretch the Ground
wire. This may cause a
ground wire disconnection
and/or damage.
DO NOT
pull the antenna and control cable re-
ceptacles. This may cause a cable disconnection
(in the tuner unit), inside connector damage or a
bad connection.
Wrap both the antenna and the control cable con-
nectors with rubber vulcanizing tape, and then
wrap electrical tape over the rubber vulcanizing
tape to help in waterproofing.
CAUTION:
DO NOT
transmit continuously while
using an AT230, otherwise the AT230 will be dam-
aged.