2001 NEW
2001 NEW
11
2
BASIC OPERATION
2001 NEW
In the VFO mode, you can set a desired operating fre-
quency, operating mode or split frequency function.
NOTE:
•
The VFO mode operation can be disabled in the
Admin Menu.
•
While in the VFO mode, the Selcall, ALE features
or the Emergency key cannot be used.
• Entering the VFO mode
Push
[VFO]
(2) to turn the VFO mode ON or OFF.
• Frequency setting
q
Push
[A/B]
(
§
) to select VFO A or VFO B.
w
Push
[
4
]
to enter the frequency setting mode.
e
Push
[
t
]
(
§
) or
[
u
]
(
§§§
)
to move the cursor to se-
lect the desired digit to change.
• The cursor is displayed below the selected digit
.
r
Push
[
r
]
or
[
s
]
to change the frequency.
t
Push
[
4
]
to exit the frequency setting mode.
• Turning ON the split frequency function
q
Push
[A/B]
(
§
) to select VFO A or VFO B, and
separately set the receive and transmit frequen-
cies.
w
Push
[Split]
(
§§§
) to turn the split frequency func-
tion ON.
• The TX frequency appears below the RX frequency
.
• Pushing
[A/B]
(
§
) changes the VFOs between trans-
mit and receive.
e
To turn OFF the split frequency function, push
[Split]
(
§§§
) again.
[
��
]
[
���
]
[
�
]
/
■
VFO operation
