AMG Systems Ltd. reserves the right to make changes to this document without
notice. The information herein is believed to be accurate. No responsibility is
assumed by AMG for its use.
Page 1 of 6
AMG2648R Instruction
Sheet D15534-01
AMG2648R
Instruction Manual
4 Channel Video RX Unit with 4 bi-directional data
and 4 bi-directional audio
The
AMG2648R
is a four channel video receive unit. It also has the capacity to transmit and receive
four data and four audio signals. The data and audio interfaces are enabled by fitting data and audio
interface daughter boards. All the signals are transmitted and received over two multimode mode
optical fibres. The
AMG2648R
is designed to plug into an
AMG2000
or an
AMG2005
subrack, which
in turn fits into a 19” rack system.
The
AMG2648R
is designed to operate with
AMG2647(R)
four channel video transmit unit with four
channels of bi-directional audio and with four channels of bi-directional data.
Connections
Video Output Connections
No of Channels .................................... 4
Connectors ......................................... 75 ohm BNC Socket.
Output Impedance ............................... 75 ohm terminated.
Output Level ........................................1 volt p-p nominal
Frequency Response .......................... 10Hz to 5.75MHz min.
Data and Audio Connections
No. of Data Channels .......................... 4
No. of Audio Channels ......................... 4
Connector ........................................... All on one 37 way D-Type female connector - shielded.
Connections......................................... See below for connection and configuration
D
A
T
A
A
N
D
A
U
D
I
O
CH 4
CH 3
CH 2
CH 1
OPTO
OUT
OPTO
IN
2648R
AMG
PRIMARY OPTO SYNC
TX
O O
RX
DATA CHANNELS
RX
O O
RX
TX
O O
TX
RX
O O
RX
TX
O O
TX
VIDEO PRESENT
CH1
O O
CH2
CH3
O O
CH4
POWER
O
POWER
O
AUDIO CHANNELS
CH1
TX
O O
RX
CH2
TX
O O
RX
CH3
TX
O O
RX
CH4
TX
O O
RX
CH1
CH2
CH3
CH4
